 |
|
 |
|
|
|
|
|
|
|
|
Bias-Tees |
|
Frequencies from 10KHz to 20GHz |
|
|
|
||||
|
Sales/Technical Contact Email: Sales@UMCC111.com |
||||
|
> Specifications are subject to change
without notice > for Specifications-Sheet in PDF, click on the product model number > to see the actual response curves, click on "  " (subject to availability) |
 |
|||
|
Bias Tees |
Other connector options are available (click on the model number to see the Option-Table) |
|||||||||
|
Model Number  |
Frequency Range |
Insertion Loss (Max) |
VSWR (Max) |
Isolation Bias to RF (Min) |
AVG RF Power (Max) |
Bias Voltage (Max) |
Bias Frequency Bandwidth |
Bias Current (Max) |
Bias
DC Resistance (Max) |
Outline Drawing |
|
BT-2410-B All BNC(f) BT-2410-S with SMA(f) BT-2410-N with N(f) |
10 KHz
- 2400 MHz |
1.0 dB {1.2dB Over 10-20 KHz} |
1.35
: 1 {1.8:1 Over 10-30 KHz} |
40 dB {35 dB Over 10-30 KHz} |
20 W | 100 V |
DC - 300 Hz {Solder-Pin for Bias} |
400 mA | 4.0 Ohm |
Fig.8-B { RF & RF+DC with BNC(f) }
Fig.8-S { RF & RF+DC with N(f) } |
|
Ultra
Wide Band BT-5010-S |
10 KHz
- 5000 MHz |
1.0 dB {1.3dB Over 10-20 KHz} |
1.35
: 1 {1.9 Over 10-30 KHz} |
40 dB {30 dB Over 10-20 KHz} |
20 W | 100 V |
DC - 300 Hz {Solder-Pin for Bias} |
400 mA | 4.0 Ohm |
Fig.8-S |
|
BT-1510-B All BNC(f) BT-1510-S with SMA(f) BT-1510-N with N(f) |
10 KHz
- 1500 MHz |
1.1dB |
1.35
: 1 {1.6:1 Over 10-20 KHz} |
40 dB {20dB Over 10-20KHz} & {30dB over 20-40KHz} |
20 W | 100 V |
DC - 1 KHz {Solder-Pin for Bias} |
400 mA | 4.0 Ohm |
Fig.8-B { RF & RF+DC with BNC(f) }
Fig.8-S { RF & RF+DC with N(f) }
|
|
BT-2020-B All BNC(f) BT-2020-S with SMA(f) BT-2020-N with N(f) |
20 KHz
- 2000 MHz |
0.5 dB | 1.35 : 1 | 30 dB | 10 W | 100 V |
DC - 1 KHz {Solder-Pin for Bias} |
60 mA | 0.6 Ohm | |
|
High
Current BT-H007-B All BNC(f) BT-H007-S with SMA(f) BT-H007-N with N(f) |
20 KHz
- 2500 MHz |
1.2 dB |
1.4
: 1 {1.8:1 Over 20-40 KHz} |
40 dB | 20 W | 100 V |
DC - 300 Hz {Solder-Pin for Bias} |
1 A | 1.2 Ohm |
Fig.10-B { RF & RF+DC with BNC(f) }
Fig.10-S { RF & RF+DC with N(f) } |
|
BT-1150-B with BNC(f) BT-1150-LS with SMA(f) BT-1150-N with N(f) BT-1150-SB With SMA(f) ; BNC(f) for DC |
150 KHz
- 1000 MHz |
0.5 dB | 1.25 : 1 | 40 dB | 10 W | 50 V |
DC - 3 KHz {Solder-Pin for Bias} |
600 mA | 1.0 Ohm |
Fig.8-B { RF & RF+DC with BNC(f) }
Fig.1 { RF & RF+DC with SMA(f) }
Fig.8-N { RF & RF+DC with N(f) }
Fig.8-SB
|
|
BT-H060-B with BNC(f) BT-H060-LS with S MA(f) BT-H060-N with N(f) BT-H060-SB With SMA(f) ; BNC(f) for DC |
200KHz
- 60 MHz |
0.15 dB | 1.20 : 1 | 40 dB | 50 W | 50 V |
DC - 3 KHz {Solder-Pin for Bias} |
850 mA | 1.0 Ohm | |
|
BT-H150-B with BNC(f) BT-H150-LS with SMA(f) BT-H150-N with N(f) BT-H150-SB With SMA(f) ; BNC(f) for DC |
1MHz
- 150 MHz |
0.2 dB | 1.3 : 1 | 40 dB | 50 W | 50 V |
DC - 5 KHz {Solder-Pin for Bias} |
850 mA | 0.7 Ohm | |
|
BT-1010-B with BNC(f) BT-1010-LS with SMA(f) BT-1010-N with N(f) BT-1010-SB With SMA(f) ; BNC(f) for DC |
10 MHz
- 1000 MHz |
0.5 dB | 1.3 : 1 | 45 dB | 50 W | 100 V |
DC - 100 KHz {Solder-Pin for Bias} |
850 mA | 0.4 Ohm | |
|
High
Current BT-H250-LN |
250 MHz - 2.5 GHz |
0.3 dB | 1.25 : 1 | 50 dB | 150 W | 150 V |
DC - 40 MHz {Solder-Pin for Bias} |
5 A | 0.1 Ohm |
Fig.5 { RF & RF+DC with N(f) } |
|
BT-1250-MS |
50 - 1250 MHz | 0.2 dB | 1.25 : 1 | 30 dB | 50 W | 100 V |
DC - 5 MHz {Solder-Pin for Bias} |
750 mA | 0.2 Ohm |
Fig.2 { RF & RF+DC with SMA(f) }
|
|
High Current
BT-1500-MS |
300 - 1500 MHz | 0.2 dB | 1.25 : 1 | 40 dB | 40 W | 100 V |
DC - 3 MHz {Solder-Pin for Bias} |
2.5 A | 0.1 Ohm | |
|
BT-3020-MS |
20 - 3000 MHz | 0.4 dB | 1.20 : 1 | 30 dB | 10 W | 50 V |
DC - 4 MHz {Solder-Pin for Bias} |
300 mA | 0.4 Ohm | |
|
BT-302H-MS |
20 - 3000 MHz | 0.5 dB | 1.20 : 1 | 30 dB | 10 W | 50 V |
DC - 4 MHz {Solder-Pin for Bias} |
600 mA | 0.3 Ohm | |
|
BT-5030-MS |
30 - 5000 MHz | 0.4 dB | 1.20 : 1 |
35 dB { 25dB Over 30-50MHz } |
10 W | 50 V |
DC - 5 MHz {Solder-Pin for Bias} |
300 mA | 1.5 Ohm | |
|
BT-S000-HS |
2 - 18 GHz | 0.7 dB | 1.50 : 1 | 40 dB | 10 W | 50 V |
DC - 20 MHz {Solder-Pin for Bias} |
500 mA | 0.5 Ohm |
Fig.3 { RF & RF+DC with SMA(f) } SMA(M) Option Available; see Spec. Sheet |
|
High
Current BT-N000-HS |
6 - 18 GHz | 0.5 dB | 1.50 : 1 | 30 dB | 25 W | 100 V |
DC - 200 MHz {Solder-Pin for Bias} |
1 A | 0.25 Ohm | |
|
BT-T000-HS |
1 - 18 GHz | 0.7 dB | 1.50 : 1 | 25 dB | 10 W | 50 V |
DC - 8 MHz {Solder-Pin for Bias} |
350 mA | 0.5 Ohm | |
|
BT-U000-HS |
0.5 - 18 GHz | 0.9 dB | 1.50 : 1 | 40 dB | 10 W | 50 V |
DC - 10 MHz {Solder-Pin for Bias} |
350 mA | 0.7 Ohm | |
|
BT-G200-HS |
0.2 - 20 GHz | 0.8 dB | 1.45 : 1 | 30 dB | 10 W | 50 V |
DC - 10 MHz {Solder-Pin for Bias} |
175 mA | 1.0 Ohm | |
|
BT-G300-HS |
0.3 - 20 GHz | 0.8 dB | 1.45 : 1 | 30 dB | 10 W | 50 V |
DC - 10 MHz {Solder-Pin for Bias} |
300 mA | 0.5 Ohm | |
|
High
Current BT-P000-HS |
8 - 20 GHz | 0.5 dB | 1.50 : 1 | 25 dB | 25 W | 100 V |
DC - 200 MHz {Solder-Pin for Bias} |
1 A | 0.25 Ohm | |
|
High
Current BT-PN00-HS |
3.5 - 20 GHz | 0.5 dB | 1.45 : 1 | 30 dB | 25 W | 100 V |
DC - 80 MHz {Solder-Pin for Bias} |
1 A | 0.25 Ohm | |
 BT-G2SF-HS |
0.2 - 20 GHz | 0.8 dB | 1.45 : 1 | 30 dB | 10 W | 50 V |
DC - 10 MHz {SMA(f) for Bias} |
175 mA | 1.2 Ohm |
Fig.9 { All SMA(f) } |
|
BT-T0SF-HS |
1 - 18 GHz | 0.7 dB | 1.5 : 1 | 30 dB | 10 W | 50 V |
DC - 8 MHz {SMA(f) for Bias} |
350 mA | 0.5 Ohm | |
|
High
Current BT-PNSF-HS |
3.5 - 20 GHz | 0.6 dB | 1.6 : 1 | 25 dB | 25 W | 100 V |
DC - 80 MHz {SMA(f) for Bias} |
1 A | 0.25 Ohm | |
|
High
Current BT-2500-MN
|
0.3 - 2.5 GHz | 0.2 dB | 1.25 : 1 |
30 dB {20 dB Over 300-500 MHz} |
40 W | 100 V |
DC - 100 MHz {BNC(f) for Bias} |
3 A | 0.1 Ohm |
Fig.4 { RF & RF+DC with N(f) } SMA(M) Option Available; see Spec. Sheet |
| All Models: | |||
 Impedance: |
50 Ohm (Nominal) | ||
| Environmental Ratings: | |||
|
Temperature: |
|||
| - Operating | -55 degC to +95 degC | ||
| - Storage | -60 degC to +110 degC | ||
|
Humidity: |
Mil-STD-202F, Method 103B Condition B | ||
|
Shock: |
Mil-STD-202F, Method 213B Condition B | ||
|
Vibration: |
Mil-STD-202F, Method 204D Condition B | ||
|
Altitude: |
Mil-STD-202F, Method 105C Condition B | ||
|
Temp. Cycle: |
Mil-STD-202F, Method 107D Condition B | ||
|
|
|
|
.png)